{"id":314,"date":"2009-11-09T22:55:20","date_gmt":"2009-11-10T03:55:20","guid":{"rendered":"http:\/\/www.rgdaniel.com\/blog\/?p=314"},"modified":"2009-11-09T22:55:20","modified_gmt":"2009-11-10T03:55:20","slug":"something-is-askew-with-my-woodturning","status":"publish","type":"post","link":"https:\/\/www.rgdaniel.com\/blog\/2009\/11\/09\/something-is-askew-with-my-woodturning\/","title":{"rendered":"Something is askew with my woodturning"},"content":{"rendered":"
\"Googly-eyed

Why are they looking at me like that? And how is this even possible?<\/p><\/div>\n

Today was, in some ways, an important day in my development as a woodworker: it was the first time I fired up my lathe<\/strong>.\u00a0 And while momentous, it was not entirely successful…<\/p>\n

The plan was to prepare a few pen blanks<\/strong> out of some lightly-figured curly maple I had on hand (done<\/em>), build a jig to drill the blanks<\/strong> at the drill press (done<\/em>), glue in the brass tubes <\/strong>(done – still got the CA glue on my thumb to prove it<\/em>), and commence the turning!<\/p>\n

Turning done <\/em>too, technically, but here’s where I get confused. When I drilled the holes for the tubes, I just “eyeballed” the centre point, figuring that the turning process would centre everything up, by definition<\/strong>. And the turning did go reasonably well once I got the hang of the roughing gouge.<\/p>\n

But by the time I got to the point we see in the photo, it was clear that something was amiss. Sorry, askew<\/strong>. The holes are well off-centre: on one side the wood is down almost to the barrel, while on the other side there is still a good one-eighth of an inch of material left…<\/p>\n

I though that the basic premise of woodturning would make this impossible.\u00a0 How could it be so eccentric<\/strong>? Not that I’m one to talk about being eccentric. But sheesh, what’s the deal here? It’s not like it was wobbling around, it seemed to be going well… I’m using all brand new stuff, and had some instruction (in conversation, and in video and books) in exactly this setup, so I was fairly confident in my process.<\/p>\n

And yet it all went horribly wrong… well, not horribly<\/em>, but still…\u00a0 I’d like to figure out what the deal is here before I waste another blank.\u00a0 That curly maple don’t grow on trees you know…<\/p>\n","protected":false},"excerpt":{"rendered":"

Today was, in some ways, an important day in my development as a woodworker: it was the first time I fired up my lathe.\u00a0 And while momentous, it was not entirely successful… The plan was to prepare a few pen blanks out of some lightly-figured curly maple I had on hand (done), build a jig […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[18,29],"class_list":["post-314","post","type-post","status-publish","format-standard","hentry","category-woodworking","tag-lathe","tag-turning"],"_links":{"self":[{"href":"https:\/\/www.rgdaniel.com\/blog\/wp-json\/wp\/v2\/posts\/314","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.rgdaniel.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rgdaniel.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rgdaniel.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rgdaniel.com\/blog\/wp-json\/wp\/v2\/comments?post=314"}],"version-history":[{"count":0,"href":"https:\/\/www.rgdaniel.com\/blog\/wp-json\/wp\/v2\/posts\/314\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.rgdaniel.com\/blog\/wp-json\/wp\/v2\/media?parent=314"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rgdaniel.com\/blog\/wp-json\/wp\/v2\/categories?post=314"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rgdaniel.com\/blog\/wp-json\/wp\/v2\/tags?post=314"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}